1. After turning on the power, wait for about three seconds for the gyroscope to find its balance, push and pull the car back and forth to confirm whether the machine is turned on (the wheel shakes back and forth when it is not turned on, and it cannot be shaken after it is turned on, only forward and backward).
2. After confirming the power supply, put on the protective gear, step on the right pedal with your right foot, and put the upper end of the car on the right calf, swing the knee joint back and forth with a little pressure, let the car move forward and backward, practice repeatedly, and control the car proficiently before proceeding to the next action. .
3. Before getting into the car, push your left leg back, lean forward, give the car a bit of forward compensation speed, and step on the right pedal with your right foot. Get on the bike when moving forward (the principle is the same as riding a bicycle).
4. After getting in the car, lean forward slightly, stand up straight with your legs, raise your head, look straight ahead (without looking down at the car) and open your arms to find the left and right balance, lightly press your toes, move forward slowly, and repeat the practice. At the beginning, it will be crooked and crooked. After about half an hour of study, you will find the feeling. After an hour, you will be able to use it freely. After three hours, the car and the car will become one.
5. During practice, the calf will be red, swollen and painful. This is caused by the tension of the beginner and the friction between the legs and the car. This is a normal phenomenon. It will disappear after three to five days. After mastering the riding technique, the calf will not be tight. Post cars, the above phenomenon will not exist.
6. When you want to slow down or stop, lean backward or lift your toes, the car will slow down or stop completely. The greater the backward lean or the lift of the toes, the faster the car will decelerate. Special reminder, the range of forward or brake action when riding It is not easy to be too big to avoid falling. Do not accelerate or decelerate quickly, and do not lean forward or lean excessively.
7. Both the battery and the control panel of this car have over-speed protection, and will give an alarm when the speed exceeds 12 kilometers per hour, please do not continue to accelerate!
8. Stop the power supply after exceeding the speed of 18 kilometers per hour. At this time, the car will be in a state of free movement, which is very dangerous! Do not drive too fast!
The above is about how to control the electric balance car and the operation of the electric balance car. This is the introduction. The electric balance car is a high-tech intelligent product that uses the principle of dynamic balance to control forward and backward. With the tilt of the body, you can control the driving as you want. Speed and direction. Its operating principle is based on the basic principle of “dynamic stability”. It uses a built-in precision solid-state gyroscope to determine the body’s posture state. After calculating appropriate instructions through a precision and high-speed central microprocessor, it drives the motor to To achieve a balanced effect.
